How to Properly Set Up a New Shower Fixture: Step-by-Step Guide

How to Properly Set Up a New Shower Fixture: Step-by-Step Guide

Blog Article

Schedule Appointment Now

Each person seems to have their own unique theory on the subject of How to Install a Direct-to-Stud Shower Enclosure.

An effective shower installment needs careful preparation as well as a great deal of job. For the most part, you will require to do 3 sorts of tasks: framing walls, installing the plumbing, and also finishing walls.

Preparation

Firstly, you have to choose the kind of shower that you want to set up. It is important to identify whether the selected shower can coping with specific systems and also can manage a safe level of water with the boiler. Most shower systems nowadays are designed to be flexible to different water pressures (such as kept hot water as well as cold keys).
It is additionally important to take into consideration the water pressure and the planning of the piping as well as drainage for the shower

Different Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower device can be linked to the bath faucet according to your requirement, and also the water temperature can be adjusted by means of the taps. Push-on mixers are cheap as well as extremely straightforward to set up. Nonetheless, although the hose pipe link is simple, it is easily displaced. Furthermore, it is bothersome to change the temperature level.

Bath/Shower Mixer: The hose pipe and spray of this sort of shower are combined with a bath mixer faucet, as well as the temperature can be readjusted through the bath faucets. It is an extremely low-cost alternative and also no added plumbing is involved. Nonetheless, the bath/shower mixers also deal with bothersome temperature level control alternatives.

Manual Mixer: The hose and spray of a hand-operated mixer shower device belong of the wall unit and also the cold and hot water materials are connected to a solitary valve The temperature and pressure of the water are controlled via either one or a range of knobs (in extra pricey showers). Although temperature control is a lot easier in hands-on mixer kinds, they are more pricey than the formerly mentioned mixers. They also need added plumbing of hot and cold water pipes.

Thermostatic Mixer: The pipe as well as spray of this shower type belong of the wall surface system as well as the hot and cold water materials are linked to a solitary shutoff below too. It is total with a built-in stabiliser to self-adjust the water temperature level and to stop it from becoming also warm. One of the largest advantages of a thermostatic mixer shower kind includes practical temperature level control. Nevertheless, it is the most costly of the various mixer alternatives.

Power Shower: A power shower is a solitary unit consisting of an effective electrical pump that is capable of changing both the water stress and also temperature. This type of shower can be fitted if there is supply of water from a cold water tank and a warm water cylinder. A power shower makes the modification of both pressure and temperature easy. On the other hand, it disagrees for water warmed straight by the shower or where the water is supplied by a combination central heating boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is important to keep in mind that for this shower kind to be set up, the mains stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature and stress to be readjusted by means of a handle. Versions with temperature level stabilisers are better as they remain unaffected by other faucets somewhere else in use within the household. A significant drawback of electric showers is that the control handle just permits the option of high temperatures at much less pressure, or lower temperature levels at a greater stress. This is problematic in the winter season when the spray is typically weak and the keys water is cooler. Nonetheless, this trouble is taken on in some versions which are readily available with a winter/summer setting.

Method

Depending on the type of shower you wish to set up, the shower head need to either be suited order to prevent its contact with the water in the bath below or the base tray, or it should have a check valve.
Prior to beginning, it is advisable to note the settings of the shower head as well as control, as well as to prepare the pipe-work included. Additionally, the drain system to eliminate the drainage will certainly require to be prepared. Both placements of the cable path as well as the shower switch will certainly likewise require to be taken into consideration if a rapid or electric shower system is being set up.
Make use of the direction guide given with the shower unit to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is necessary to cut off the water system. In order to protect the pipelines, they ought to be provided a water resistant covering and additionally fitted with isolating valves. The pipelines can after that be hidden into the wall and plastered over to neaten the total appearance.
Fit the base tray, shower head, and also installations.
Attach the major shower control to the pipelines that will certainly be providing the water (This might require a female screw thread adapter).
Reconnect the water as well as examination the pipelines for any type of leaks, as some may need tightening up.
If you are setting up an electrical shower, remember to turn off the electrical power supply prior to making any electrical links. As soon as these links have actually been made (there must be guidance within the user's manual), the power supply can be switched back on.

Adjusting Water Stress to Suit Your Shower

The cold water tank can be lifted to a better height (in some cases just 150mm (6inches)) by fitting a strong wooden support below it - perhaps made up of struts and blockboards. If you pick this alternative, the primary as well as distribution pipes will certainly also have to be elevated to satisfy the new height of the tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it should be linked right into the power supply in order to operate.

Piping and Drainage

It is best to make use of 15mm size supply pipes, and also make the runs to the shower as brief and straight as feasible so as to keep optimal pressure and reduce warmth loss. In addition, by minimising the use of arm joints for pipe corners, you can decrease the resistance in the flow of the supply of water. You can achieve this by bending the pipelines rather.

A Lot Of Usual Errors

Breaking or neglecting neighborhood code limitations.

Utilizing pipelines that are as well tiny.

Connecting copper to galvanized without making use of a brass or dielectric fitting in between the two.

Not making use of tape or pipeline substance at threaded joints.

Not leveling your fixtures when installing them.

Not mounting an air gap filling up for components.

Reducing supply stub outs also short to install the shutoff valves onto after the finished wall surface remains in place.

Not appropriately lining up tubes right into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leakage.).

When transforming the water back on in your home, always run the outdoors tube shutoff or flush your toilets to bleed dirt as well as air from the lines. This particles can trigger troubles in your sink taps and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I hope you liked our section about How to Install a Direct-to-Stud Shower Enclosure. Many thanks for taking the time to read through our piece. Enjoyed reading our posting? Please share it. Let somebody else locate it. I love reading our article about How to Install a Freestand.

Address emergency plumbing promptly here.

Report this page